&
OPERATING INSTRUCTIONS IN BRIEF
The remote control
Front of the set
STANDBY m
CLEAR
m
Standby
Standby
Reset/clear
P p
Programme number Plus/Minus
Volume control
0-9
Digit buttons 0-9
’VIDEOPlus+’ programming
TIMER programming on the set
Call menu
Sp
5
SV/V+
Record
TIMER k
MENU
H
h
Rewind/Reverse scanning
Pause/Stop
OK
Confirm button
G
D/C/A/B
Sp
P p
Playback
Menu left/right/up/down
Volume control
I
J
Forward wind/ Forward scanning
Cassette eject
Programme number Plus/Minus
Mute sound
MUTE y
GPLAY
H
w
Headphones socket
Audio input socket
Video input socket
Playback
AUDIO
VIDEO
Rewind/Reverse scanning
Pause/Stop
STOP h
I
Forward wind/ Forward scanning
Index search
INDEX E
RECORD n
STILL R
INFO ,
TRANSP. -
TELETEXT e
CLOCK .
Record
Still picture
TELETEXT page 100
TELETEXT transparent
TELETEXT on/off
TELETEXT clock time
In TELETEXT you can store the relevant page with the
OK
button.
Selecting TELETEXT functions: when you are in
MENU
TELETEXT, press the
button. Select the
D
C
required function with the
OK
and the
buttons.
Confirm with the
button.
OPERATING INSTRUCTIONS PHILIPS 14PV284/05
Congratulations on the purchase of one of the most
sophisticated and simple-to-use television/video recorder
combinations (TV Combi) on the market. With this TV Combi
Contents
Page
1. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connecting additional equipment . . . . . . . . . . . . . . . . . . . 3
Emergency interrupt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
User guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Making standard settings . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting the clock and date . . . . . . . . . . . . . . . . . . . . . . . . . . 3
you can record and play VHS-standard cassettes.
2. PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Please take the time to read this operating manual before
using your TV Combi.
Continuous playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. RECORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Programming with ’VIDEOPlus+’ . . . . . . . . . . . . . . . . . . . . 7
Safety instructions and other notes
4. SPECIAL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
On Screen Display (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Sleep function (switch off) . . . . . . . . . . . . . . . . . . . . . . . . . 8
Switch set on function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Child lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Before you call an engineer . . . . . . . . . . . . . . . . . . . . . . . 10
•
Danger: high voltage! Do not open the set. The set does not
contain any components that can be repaired by the customer.
When the appliance is connected to the power supply there are
some components that are constantly operational. To switch off
the set completely you must disconnect it from the power supply.
Note that this power pack is designed for a power supply of
220-240V/50Hz.
•
•
•
Ensure that air can circulate freely through the ventilation slots
on the set.
Ensure that no objects or liquids enter the set. If liquid is spilt into
it, disconnect the set immediately from the power supply and call
the After-sales Service for advice.
•
The set should not be used immediately after transportation from
a cold to a hot area or vice versa, or in conditions of extreme
humidity.
After unpacking the set, it should be allowed to acclimatize for at
least three hours before installation.
These operating instructions have been printed on nonpolluting
paper.
•
•
•
Deposit old batteries at the relevant collection points.
Please make use of the facilities available in your country for
disposing of the packaging of the set in a way that helps to
protect the environment.
•
•
This electronic equipment contains many materials that can be
recycled. Please inquire about the possibilities for recycling your
old set.
VIDEOPlus+ and PlusCode are trademarks of Gemstar Develop-
ment Corpoation. The VIDEOPlus+ system is manufactured under
licence from Gemstar Development Corporation.
1
1. INSTALLATION
Important for the United Kingdom
Connecting the cables
This apparatus is fitted with an approved moulded 13 Amp
plug. To change a fuse in this type of plug proceed as follows:
1 Remove fuse cover and fuse.
2 Fix new fuse which should be a BS1362 5A, A.S.T.A. or BSI
approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of
5A. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5A.
2
1 Insert the aerial plug into the
socket.
If you use the auxiliary aerial supplied, push the aerial into the
mounting on the back panel until it snaps into place.
Pull out the telescopic rod(s) as far as required. Tilt and rotate
the aerial until you have got the best picture quality.
Note: * The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a 13A
socket elsewhere.
2 Insert the plug of the mains cable into the wall socket.
How to connect a plug:
The wires in the mains lead are coloured in accordance with
the following code:
8
3 Switch the set on. The power switch
is located on
the left side panel of the set.
BLUE - ’NEUTRAL’ (’N’)
BROWN - ’LIVE’ (’L’)
Important notes for operation
1 The BLUE wire must be connected to the terminal which is
•
We advise you, from now on, to switch the set to standby
STANDBY m
marked with the letter ’N’ or coloured BLACK.
using the
the remote control.
button on the front of the set or on
•
•
•
When the set is in the standby mode, a small red lamp on
2 The BROWN wire must be connected to the terminal
the left of the front of the set will be alight.
which is marked with the letter ’L’ or coloured RED.
STOP h
You can switch on with the
button, the
0-9
buttons or by inserting a cassette.
Attention: When you use the power switch
3 Do not connect either wires to the earth terminal in the
8
on the
plug which is marked with the letter ’E’ or by the safety
side panel, you have completely switched off the set from
the mains power supply. No programmed recordings will
then be made. The red lamp on the left of the front of the
set will not be alight. After a few hours, the date and clock
settings will be lost.
\
earth symbol
yellow.
or coloured green or green-and-
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not simply over
the two wires.
•
•
Attention: Before you switch off the appliance with the
8
power switch
, remove the tape by pressing the
J
button.
Keep your TV Combi connected to the mains and the
power switch in ’on’ position at all times to ensure that
programmed recordings can be made and that the
television functions normally. The power consumption
required is low.
•
Back-up power supply: TV channel storage - typically 1
year, Clock/Timer - typically 30 hours.
2
Connecting additional equipment
Making standard settings
EXTERNAL
STOP h
You can also connect additional equipment to the
1 To start, press the
button. Press the menu
D
C
socket, for instance, a decoder satellite receiver or camcor-
der.
buttons
and
simultaneously.
INSTALLATION
v w
LANGUAGE
COUNTRY
EN
GB
AUTO STORE
MANUAL STORE
SORT
PP STORE
2 Select the required display language in the ’LANGUAGE’
Emergency interrupt
line.
3 Select your country in the ’COUNTRY’ line.
Both the set and the remote control have an ’Emergency
STANDBY m
interrupt’ button. You can use the
terrupt any function.
button to in-
STANDBY m
To interrupt a TIMER recording, press the
ton several seconds.
but-
Setting the clock and date
Whenever you have operating problems you can simply
interrupt the function and start again.
You can practise operating your set without any worries. No
matter which buttons you press, you cannot damage it.
STOP h
1 To start, press the
button.
MENU
2 Press the
button.
3 Select and confirm the line ’FEATURES’ .
User guide
4 Select and confirm the line ’SET CLOCK’ .
With OSD (On Screen Display) the corresponding functions
appear on the TV-screen. The most important button-functions
are displayed at the bottom of the screen.
CLOCK
TIME
YEAR
MONTH
DATE
20:00
1997
01
Throughout this instruction manual, use the following buttons
for the functions ’Call up’, ’Select’, ’Enter’/’Adjust’, ’Confirm’
01
and ’Exit’:
x y 0-9
MENU
•
Call up: Use the
button.
A
D
B
•
Select: Select a line with the
or
or
button.
menu but-
5 Enter the time, year, month and date.
0-9
C
Use the
buttons or the
ton to select within a line.
D
C
•
Enter/Alter: With the
or
or with the
0-9
button.
OK
•
•
Confirm: With the
button.
MENU
Exit: With the
.
3
Automatic Channel Search
Allocating channel numbers
STOP h
STOP h
1 Switch on with the
button. Press the menu
1 Switch on with the
button. Press the menu
D
C
D
C
buttons
and
simultaneously.
buttons
and
simultaneously.
2 Select and confirm the line ’AUTO STORE’ .
2 Select and confirm the line ’SORT’ .
The ’Automatic Channel Search’ function starts.
SORT
v w
AUTO STORE
C-21
P01
FROM
TO
PRESS x y TO STOP
P02
STORE
SEARCH
PLEASE WAIT
CHANNELS FOUND:
1
aaabbbbbbbbbbbbbbbbb
3 On the TV screen, in the line ’FROM’ , select the TV
channel to which you want to allocate a programme
number, e.g.: ’P 01’ .
3 Wait until all TV channels have been stored.
All TV channels will be stored from programme number
69 downward.
4 In the line ’TO’ , select the required programme number,
How to search for a TV channel manually, you can read in
chapter 4 ’SPECIAL FEATURES’ in the section ’Manual
channel search’.
e.g.: ’P 02’ .
5 Select and confirm the line ’STORE’ .
The allocated TV channels will be exchanged.
Note: Automatic Channel Installation (ACI), only for sets
with TELETEXT:
Some cable companies or broadcasters offer the pos-
sibility to install TV channels automatically with ’ACI’.
Information about the installation offered and how to
select it, will appear in the display.
6 Repeat steps 3to 5until you have allocated a pro-
gramme number to all the required TV channels.
MENU
To finish, press the
button twice.
This set will recognize and install TV channels with ’ACI’
automatically.
TV channels will be stored from programme number 1
onward.
If ’ACI’ cannot identify a TV channel, you can search for
it using the method as described in the section ’Manual
channel search’.
* If the ’Automatic channel search’ function is activated,
any previously programmed TIMER blocks will be
cleared.
You can store up to 69 TV channels.
4
2. PLAYBACK
1 Insert a cassette into the cassette slot.
Tape position/Index search
GPLAY
2 Press the
playback button.
OK
Tape position: If you press the
button the tape position
H
I
3 Picture search: Now press the
(rewind) or
will be shown in the display during Wind, Rewind, Record,
Playback and Pause/Stop.
(wind) button once or several times.
STOP h
4 Interrupt: Press the
button.
Index search: Every time you start to record, the tape is
marked with a code mark.
H
5 Wind: Stop the tape and press the
(rewind) or the
I
INDEX E
I
(wind) button.
1 Press the
button. Press the
button to
button for the
H
select the next code mark or the
previous code mark.
J
6 Eject: Press the
button on the set.
Note: Some functions switch off automatically after a
while (e.g.: Pause, Still Picture, Scanning). This helps to
protect the cassette and prevent unnecessary power
consumption.
* With this set you can play back cassettes that have
been recorded on another TV Combi in the NTSC
standard.
* If you load a cassette with erase protection, the TV
Combi starts playback automatically.
* The picture quality is affected during scanning. The
sound is switched off.
* Remove the cassette before transporting the TV
Combi.
2 Once the TV Combi finds the code mark or unrecorded
area it will automatically switch to playback.
Note: When you press any tape transport button (e.g.:
H
I
the
stopped.
or
button) this search function will be
* You cannot use this function with recordings made on
another video recorder that does not have this function.
Eliminating picture interference
MENU
1 During playback press the
button.
2 Select and confirm the ’SPECIAL’ line.
Still picture
3 Select the ’TRACKING’ line.
STILL R
1 Press the
button. You see a still picture.
D
C
4 Press the
or
button until the playback
Interference stripes will appear.
quality is at its best.
STILL R
Each time you press the
button again the pic-
ture will move on one step.
MENU
5 Press the
button. This setting will remain until
you remove the cassette.
MENU
6 Cleaning function: Press the
button.
Continuous playback
7 Select and confirm the ’SPECIAL’ line.
MENU
1 Press the
button.
8 Select the ’CLEANING’ line.
2 Select and confirm the ’SPECIAL’ line.
OK
9 Press the
button. A blue screen appears for a few
3 Select the ’REPEAT PLAY’ line. Switch on the continuous
seconds.
playback.
0 Wait until the blue screen disappears and press the
MENU
4 Press the
button.
MENU
button.
GPLAY
5 Start the continuous playback with the
playback
Note:
button.
* Some hired cassettes may have a poor picture/sound
quality. This is not a fault in your set.
6 If you want to cancel the function, stop the continous
playback in the ’REPEAT PLAY’ line.
5
3. RECORD
1 Insert a cassette.
Programme a recording
P p
2 Use the
button to select the programme number
The set needs the following information for every pro-
grammed recording:
from which you wish to record, e.g.: ’P 01’ .
RECORD n
3 Press the
button.
* the date on which the recording is to be made
* the programme number for the TV channel
* the start and end time of the recording
* VPS/PDC on or off
STOP h
4 Use the
button to stop the recording.
5 If, whilst recording, you want to switch off the TV screen,
STANDBY m
press the
button once.
The set stores all the information mentioned above in what is
known as a TIMER block. It can store 6 TIMER blocks for up
to one month in advance.
P p
To switch the TV screen on again, press the
button.
Important notes for recoding
’VPS’ (Video Programming System)/ ’PDC’
(Programme Delivery Control)
•
OTR: If you do not want to record to the end of the
RECORD n
cassette, press the
button again. The display
shows at what time the recording will stop.
D
C
With the
or the
button you can change the
With ’VPS/PDC’, the TV station controls the start and the
duration of a programmed recording. This means that the
video recorder switches itself on and off at the right time
even if a TV programme you have programmed begins earlier
or finishes later than expected.
Usually the start time is the same as the ’VPS/PDC’ time. If,
however, a different ’VPS/PDC’ time is given, e.g.: ’20.15
(VPS/PDC 20.14)’, you have to enter ’20.14’ (the ’VPS/PDC’
time) exactly to the minute.
end time of the recording in 30 minute intervals.
If you wish to cancel the end time, press the
button. This does not effect the recording.
Programme number ’E1’ is provided for recording from
external sources (via the
Programme number ’AV’ is provided for recording from
external sources (via the front socket).
Erase protection: So that you don’t accidentally delete an
important recording, you can remove the special tab
(erase protection) on the narrow side of the cassette with
a screwdriver or slide the special tab to the left.
Later, if you no longer want the cassette to be erase
protected, you can seal the gap again with adhesive tape
or slide the special tab to the right.
CLEAR
•
•
•
EXTERNAL
scart socket).
If you are not using ’VPS/PDC’, the ’VPS/PDC’ indication must
be off.
•
Auto-assembling: You can use the auto-assembling func-
tion to join individual recordings without any major
picture disturbance between the recordings.
Search for the correct position on the tape and then stop
STOP h
the playback by pressing the
appears in the display.
button. ’PAUSE’
Now start recording as usual by pressing the
RECORD n
button.
MENU
•
Long play: Before recording, press the
Select and confirm the ’SPECIAL’ line.
Select and confirm the ’TAPE SPEED’ line.
button.
Select the ’LP’ (=LongPlay) recording speed and stop by
MENU
pressing the
button.
During playback the TV Combi will automatically select
the correct playback speed.
6
Programming with ’VIDEOPlus+’
How to enter, check or clear a TIMER
block manually
All the information required for programming is encoded in
the ’VIDEOPlus+’ code.
TIMER k
1 Press the
button.
SV/V+
1 Press the
button on the remote control.
2 Select a free TIMER block or the TIMER block you want
to check or clear.
2 Enter the entire ’VIDEOPlus+ code’. This code (up to 9
digits) is found next to the start time of a TV programme
in your TV guide.
CLEAR
3 Clear: Press the
button.
D
C
If you entered an incorrect code number, clear it with the
4 Enter/Check: Press the
or
button to switch
CLEAR
button.
between ’DATE’ (date), ’DW’ (daily, weekly), ’PR’ (pro-
gramme number), ’START’ (start time) and ’END’ (end
time).
VIDEOPLUS
CODE
A
B
0-9
Press the
change the data.
and the
, or the
buttons to
DAILY/WEEKLY
PROGRAMME NR.
ONCE
01
MENU
5 To end programming, press the
button.
STANDBY m
6 Press the
button.
x y 0-9
OK
3 If you want to repeat programming at daily or weekly
intervals, select the required setting in the ’DAILY/WEEK-
LY’ line.
Important notes for programmed recordings
•
If the message ’PLEASE PRESS STOP’ or ’PLEASE PRESS
STANDBY’ appears on the TV screen, press the
’Daily’ programming can only be used for recordings to
be made from Mondays to Fridays inclusive.
STOP h
STANDBY m
or the
button.
A TIMER recording will function only, if the set isn’t used
for other video recorder functions (e.g.: playback).
The TIMER lamp on the front of the set lights up when
one or more of the TIMER blocks are occupied.
If the end of the cassette is reached during a recording,
the video recorder automatically ejects the cassette. The
set switches off after a few minutes.
If you forget to load a cassette, ’NO CASSETTE CANNOT
RECORD’ will appear.
If you inserted a cassette with erase protection when you
want to start a recording, the cassette will be ejected.
If ’CODE ERROR’ appears on the TV screen, you entered
4 After the confirmation the corresponding data appears on
the TV screen.
•
•
Note: If you use ’VIDEOPlus+’ for the first time, the
’PROGRAMME NR.’ line appears when you enter the
’VIDEOPlus+’ code. Enter the required programme num-
ber for this TV channel.
•
•
•
DATE DW PR START END
d
01
01 17:15 18:45
an incorrect code number or the incorrect date. Repeat
STANDBY m
the entry or end with the
button.
With ’Daily’ programming, the first recording must take
place within a week.
v w x y 0-9
OK
•
•
If ’DAILY ERROR’ appears on the TV screen, the date was
incorrectly entered. ’Daily’ programming can only be used
for recordings to be made from Mondays to Fridays
inclusive.
The programmed recording will always be made at the
recording speed (SP/LP) that has already been selected
on the TV Combi.
OK
5 Confirm with the
button.
The data has been stored in a TIMER block.
Please ensure that you loaded a cassette without erase
protection.
7
4. SPECIAL FEATURES
3 Select the ’DISPLAY’ line.
How to read TELETEXT
TELETEXT e
•
Press the
button to switch the TXT decoder
4 Select one of the options indicated.
’FULL’: OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’OFF’: OSD is switched off.
on and off. The TV-VIDEO Combi is now receiving the TXT
of the TV channel currently selected.
To store the current page, press the
If you want to select an other page, type in the number
OK
•
•
button.
’PROG’: only the programm number appears.
’COUNT’: only the counter appears.
0-9
with the digit buttons
.
MENU
5 Confirm it with the
button.
Extra TELETEXT functions
•
•
•
If you want to superimpose the clock time, press the
OK
Note: With the
button you can superimpose the
CLOCK .
button.
actual operating mode on the TV screen.
If you want to go to TELETEXT page 100, press the
INFO ,
button.
If you want TELETEXT to be shown transparently, press
TRANSP. -
the
button.
Personal Preset
MENU
To use the extra TELETEXT functions, press the
ton, when you are in TELETEXT.
but-
You can make your personal picture and volume settings
here. You can call up this setting and it will be used
automatically when you switch the set on.
•
•
•
To enlarge the print, select the symbol ’ e; ’ and confirm
OK
with the
button.
To switch off the TELETEXT decoder temporarily, select
OK
the symbol ’ eX ’ and confirm with the
button.
1 Select your personal setting. (see chapter ’The TV set
To call up a sub-page:
D
C
functions’). Press the menu buttons
button simultaneously.
and
OK
1 Select the symbol ’ /00 ’ and confirm with the
but-
ton.
2 Select and confirm the ’PP STORE’ line.
2 Enter the page number of the sub-page.
MENU
3 To end, press the
button. The personal setting
•
To call up concealed information, select the symbol ’ e?
has been stored.
OK
’ and confirm with the
button.
•
To stop the pages from being turned over, select the
OK
MENU
symbol ’ STOP ’ and confirm with the
button.
4 Calling up your Preset: Press the
button.
5 Select and confirm the ’FEATURES’ line.
On Screen Display (OSD)
6 Select and confirm the ’PP RECALL’ line.
You can switch OSD on or off.
MENU
7 Press the
button. The set will use this setting.
MENU
1 Press the
button.
Sleep function (switch off)
2 Select and confirm the ’FEATURES’ line.
You can programme your set to switch off after a predeter-
mined period.
FEATURES
v w
PP RECALL
ON TIMER
MENU
SLEEPTIMER
DISPLAY
0
1 Press the
button.
FULL
OFF
CHILD LOCK
SET CLOCK
2 Select and confirm the ’FEATURES’ line.
8
3 Select ’SLEEPTIMER’ line.
Manual channel search
D
C
4 With the
or the
button you can determine
In certain cases the Automatic channel search may not be
able to find all of the TV channels (e.g.: coded TV channels).
You can then use this manual method to set the channels.
the minutes left until switch off in 15 minutes intervals.
When you set the time to ’0’ with the
sleep function is switched off.
CLEAR
button the
STOP h
MENU
1 Switch on the set with the
button. Press the
5 Press the
button.
D
C
menu buttons
and
simultaneously.
2 Select and confirm the ’MANUAL STORE’ line.
Switch set on function
You can programme your set to switch on at a predetermined
time.
MANUAL STORE
v w
CHANNEL/FREQ.
SEARCH
C-21
1
FINE TUNING
PROGRAMME NR.
DECODER
MENU
1 Press the
button.
STORE
2 Select and confirm the ’FEATURES’ line.
3 Select and confirm the ’ON TIMER’ line.
4 Determine the time you wish the set to switch on.
3 Select the ’SEARCH’ line.
C
4 Press the
button as often as necessary, until you
have found the right TV channel.
5 Select the ’WAKE UP’ line and switch the ’on-timer’ on or
off.
Note:
* If you want to allocate a decoder, switch the decoder
MENU
6 Press the
button.
D
C
function on or off with the
’DECODER’ line.
or
button in the
STANDBY m
7 Press the
button.
* If you want to change the automatic channel setting,
select the ’FINE TUNING’ line.
D
C
With the
or
button you can vary the auto-
matic TV channel setting.
Child lock
Important: This re-tuning is only necessary and useful in
special cases, e.g.: when there are stripes on the
picture with cable-TV systems.
MENU
1 Press the
button.
2 Select and confirm the ’FEATURES’ line.
P p
5 In the ’PROGRAMME NR.’ line use the
button to
select the required programme number, e.g.: ’P 01’ .
3 Select the ’CHILD LOCK’ line.
6 Select and confirm the ’STORE’ line.
4 Switch the child lock on or off.
7 If you want to search for further TV channels, start again
MENU
5 Press the
button.
at step 4.
MENU
To finish, press the
button twice.
Note: If a button is pressed with the child lock ’on’,
’CHILD LOCK’ appears for a few seconds in the display.
* Programmed recordings are made despite the child
lock and cannot be interrupted.
9
Before you call an engineer
If, contrary to expectation, you experience any difficulty in
operating this TV Combi, please call the customer service in
your country.
You will find the telephone numbers in the enclosed guar-
antee leaflet.
The set does not respond to any button being pressed:
•
No power supply.
•
Technical disturbance: disconnect from the mains for 30
seconds, then re-connect.
•
•
The power switch on the side panel is switched off.
Child lock is active.
Cassette jammed:
Don’t use force. Pull out the mains plug for a moment.
•
Remote control does not operate:
•
Remote control wasn’t pointed at the set.
•
Batteries are exhausted.
No playback on TV Combi:
No recording on the cassette.
•
No TV reception:
•
The aerial is not connected.
•
No TV channels have been stored.
Poor playback from TV Combi:
•
Cassette badly worn or of poor quality.
•
Use the ’TRACKING’ function.
No recording possible:
•
TV channel not stored or wrongly selected.
•
Cassette with erase protection has been loaded.
Programmed recording does not function:
•
•
•
•
TIMER not set properly.
Time data wrongly programmed.
A cassette with erase protection has been loaded.
VPS/PDC switched on but ’VPS/PDC time’ wrong. Check
aerial.
This product complies with the requirements of the Directive
73/23/EEC + 89/336/EEC + 93/68/EEC.
TYPE
VNxx
14PV284/05
SER.NR......
10
|